AltiGen IP 710 - Manual (Page 38)

30 IP 710 Manual
Program-
mable Key*
• N/A
• BLF
• Feature
Code
• Admin
Defined #
• Line Park
• Call
Record
• Workgroup
Status
• User
Defined #
Press the appropriate key (keys 1-15) to initiate one of the
following functions pre-assigned by the system administrator:
Busy Lamp Field, AltiServ Feature Code, Admin Defined #,
Line Park, Call Record, Workgroup Status, User Defined #.
To configure a programmable key with User Defined # enabled:
a. Press the Menu button, select PHONE SETTING, and
press the Enter button.
b. Scroll to PROGRAM KEYS and press Enter.
c. Select the key to program, and press Enter.
d. Enter the appropriate digits for the speed dial number or
feature code, and press Enter.
The digits are automatically dialed when this function key is
pressed.
Speaker
To use the speakerphone:
1) Press the Speaker button.
2) To disconnect the call, press the Speaker button again.
Speed Dial*
1) Press the Speed Dial button to see a list of phone numbers
configured by the system administrator.
2) Use / to scroll to the desired entry.
3) Press the Enter button to dial the number.
Transfer*
During a call:
1) Press the Transfer button, which places the call on hold.
2) Dial the number you want to transfer the call to.
3) Hang up if the party answers the call, or press Transfer
again to complete transferring.
4) If the party refuses the call, return to the original call by
pressing the button or the Flash button.
Voice Mail
1) Press the Voice Mail button.
2) Enter voice mail password.
• The Message Waiting light blinks when a voice mail
message is waiting.
• The LCD displays the new voice mail count (which includes
only unheard messages) when onhook.
Function Key Sequence