AltiGen IP 710 - Manual (Page 19)

IP 710 Manual
11
Intercom
button
Connects you directly to
the callee’s intercom after
one ring.
Line Park
A parked call line
appearance can be
assigned as a
programmable
Line Park
key by the administrator.
When connected to a
caller, the call can be
parked by pressing the
Line Park key. If a call is
parked at a Line Park line,
the button’s light is on.
The call can be picked up
by pressing the
Line Park
key.
• When configured by the system
administrator, the IP phone can
play an audible beep or one of 14
different ring tones when a call is
parked.
• When configured by the
administrator, an alternate way to
pick up a parked call is to use
#51
<line number> if Line Park is not
assigned to a programmable key.
• The
Line Park key’s light will be
lit and turns off when the parked
call is picked up, the caller hangs
up, or the call is routed to IVR/
Auto Attendant.
Mute button
While on a call, mutes
conversation.
Program
Keys
Lets users associate a
programmable key with a
speed dial number or
feature code directly from
the IP phone. If the system administrator has
allowed it, you can associate certain
programmable keys with a speed dial
number or feature code from the IP
phone menu.
Release button
Releases a call from the
connected state. Deletes
characters entered on the
LCD. While onhook,
releases phone from an
active state. Rejects an
incoming call.
When you press the Release button to
reject an incoming call, the ringing
will stop and the call will follow the
extension's Ring No Answer (RNA)
handling rules.
Ring Tones
Select from one of 14 ring
tones.
Download new ring tones
from the server.
• Custom ring tones are not
supported.
Speaker button
Enables use of speaker
phone.
Feature Description Notes