Cobra Electronics CIR 2000 A - Manual (Page 13)

13
After the system links to the network, it will process time sync, and then go to standby
mode. Usually it will take 6-30 seconds to finish the whole process.
…
Network Connecting Time Sync processing
PM
Stand-By Mode
The default network setting for the system is LAN (or after you have chosen “Reset all
setting”). You can choose WLAN for your System’s network device by inserting the WiFi
dongle into the USB slot on the back of your system.
If you still have problems with network setting, please follow the network wizard instructions
on the next page.