Cobra Electronics CIR 2000 A - Manual (Page 63)

63
Wireless
SSID >
Encryption >
Site Survey >
Set each necessary Wi-Fi setting item.
8. icon will show on the top of the screen when the wireless setting is successful.
Wireless
SSID >
Encryption >
Site Survey >
will show when the setting is successful.
12.4.3 Setting the Wi-Fi Connectivity by Wi-Fi Wizard
1. Insert a Wi-Fi USB adapter into the USB connecto on the back of your system. r
2. Press SETUP button, then scroll up/down to [Network] and press SELECT/OK
button.
3. Select [Conn ect] and switch [LAN] to [WLAN].
Network
Connect LAN
IP Setting >
Use Proxy No
Select [Conn ect] and switch [LAN] to [WLAN].
4. Select [Wizard] and then press SELECT/OK button to enter.
Network
Connect(any~) WLAN
Wizard >
IP Setting >
Select [Wizard] and press SELECT/OK button
5. Scroll up/down to an Access Point and then press SELECT/OK button.
63
IP Setting >
IP Setting >
Connect(any~) WLAN
Network
Network
Wireless
Wireless
Use Proxy No
Site Survey >
Site Survey >
Encryption >
Encryption >
Wizard >
Connect LAN
SSID >
SSID >