Cobra Electronics CIR 2000 A - Manual (Page 72)

72
il re t rt automatic
Upgrade
Proofing
Proofing the upgrade image file…
Processing
Upgrading the firmware…
CD
The upgrade is completed.
7. The system must not be switched off or have any function key pressed during the
upgrade procedure.
NOTE: Resetting all settings after SMBB is upgraded is strongly recommended.
12.9.2 On-line upgrade
1. Make sure the internet environment is ready.
2. Press
SETUP button, then scroll up/down to [Firmware Upgrade] and press
SELECT/OK button.
Setting
Information >
Reset all Settings >
Firmware Upgrade >
Select [Firmware Upgrade], then press
SELECT/OK
Upgrade
No
Yes >
Select [Yes] and press SELECT/OK to confirm
1
Upgrade
No
Yes
Load
SD/MMC
Online
Scroll Up/Down, select [Online], and press
1
Upgrade
Checking Firmware
Searching for updated firmware version
SELECT/OK