Cobra Electronics CIR 2000 A - Manual (Page 65)

65
3. Select [IP Source] and press SELECT/OK button to switch [Dynamic] to [Static].
IP Setting
IP Source Dynamic
Press SELECT/OK to switch [IP Source] to [Static]
4. Scroll up/down to [TCP/IP] and then press SELECT/OK button to start editing.
IP Setting
IP Source Static
TCP/IP >
DNS >
Select [TCP/IP], then press SELECT/OK
5. Press UP/DOWN button to change characters, then press LEFT/RIGHT button to
shift.
TCP/IP
IP 192.169.001.100
Mask 255.255.255.000
GW 192.169.001.254
Press UP/DOWN (or number key) then LEFT/RIGHT to input IP.
6. After finishing, press REC button to confirm.
NOTE：When IP setting value (including IP, Subnet Mask, or Gateway) is illegal, IP setting
will change to default value.
TCP/IP
The IP Setting Value is
illegal ! Setting is
Changed to Default !
65