Avlink HX-2388 User Manual
Page 23
Matrix Switching System—User Manual
22
The final results will be as shown in Figure 7-3 below:
Figure 7-3
7.0.2.3 Select all output, Deselect all output Switching Functions
（1）Select all output Function Description: You can use this function to select all the
output ports to one input port.
A specific example of operation is described below:
Example: Now, you have an HX-2388 matrix with all input and output ports properly
connected to the equipments. The needed input/output ports should be set to channel 1
input to all output-ports to output.
Make sure you have selected the “Video” check box (
). Then, press the “Select
all output” key and select the input number key 01. Click on the matrix icons along the
01 row
to transform them into
to complete the command operation.
（2）Deselect all output Function Description: It is used to disable the Select all
output function.