Avlink HX-2388 - Manual (Page 27)

Matrix Switching System—User Manual
26
Output check box, then key in example “5” value in the channel 1 output. Click
anywhere on the screen, the all channel output will become “5” value.
Figure 7-9
Port Key In: A Hot key that is for key in the Value1~8 quickly.
Reserve and AV Sync: Not to be used for this Model.
Previous and Next: Not to be used for this Model
7.0.3.1 LAN Main Operation Interface
Refer to the main configuration screen as above, for the basic operation is described as
below:
Example: Now there is an HX-2388 matrix having all the input/output ports properly
connected to the equipment. If you want to set channel 1 input to channel 2, 3 and 4
output; channel 3 inputs to channel 1 output.
Figure 7-10
Step 1: For channel 2, 3, 4 Output, please key in the value “1” in the Video fields.
Step 2: For channel 1 Output, please key in the value “3” in the Video fields.
Step 3: Click “Set” button.
Upon completion of the above 3 steps, you have actually completed the switching
operation of having channel 1 input to channel 2, 3 and 4 output while at the same time
successfully switched from channel 3 input to channel 1 output.