Avlink HX-2388 - Manual (Page 26)

Matrix Switching System—User Manual
25
7.0.3 LAN Web Configuration
Open the Browser, key in the default IP address: http://192.168.0.3 to login the AV
MATRIX Control configuration screen. Once the default IP address is be changed,
please use the changed IP to login.
The software controls signal connection between the corresponding input port and
output port as required. The LAN main configuration screen is as below:
Figure 7-8 LAN Web Configuration Screen
)
HDMI is integrated Video/Audio switching equipment. Please only key in the Output
Channel No. into the Video field, the Audio field value will be a default depends on the
Video value automatically.
) HX-2388 Device ID is fixed at 0.
Scan: To search the device controlled by the LAN Web Configuration. When the
Console List content is empty, you can click the Scan to research and update the
Console List.
Options: Allows you to configure the IP address.
Set: Click this button to set the connected combinations both output and input ports.
Refresh: To refresh the values of the configuration screen. Any changed settings directly
on the HX-2388 equipment will not respond to the AV Matrix operating interface, you
have to click the Refresh button to refresh the configuration screen so that showing the
changed values.
OFF: Disable the entire output channels.
STO: The “Store Key” saves all current input/output corresponding relations.
RCL: The “Retriever Key” retrieves the saved input/output corresponding relations.
) For more relative information, please refer to 5.0.1. Front Panel.
All Output: A Hot Key for you to set the same value to all output channels. Select the All