Avlink HX-2388 User Manual
Page 9
Matrix Switching System—User Manual
8
IR1: Infrared receiver.
All: This key allows you to set single input channel to all output channels.
- Press the “All” key.
- Select the one of the IN 1~8 keys.
- The selected IN x key will deliver the signal to all output channels.
- You can also press the “All” key and then the “OFF” key to disable all the
displayed switching settings.
OFF: Disable the entire output channels. Press the one of the OUT x keys that you
want to disable the output channel, then press the OFF key. You can also press the
“All” button and then the “OFF” button to disable all the displayed switching settings.
STO: The “Store Key” saves all current input/output corresponding relations.
- Press the “STO” key firstly. (Supports up to 8 sets of memories, you can select
the memory location through OUT1~OUT8)
- Arrange the Output and Input channel combinations (output channel key 1~8).
- The relation between the Output and Input settings will be saved in the memory
permanently.
RCL: The “Retriever Key” retrieves the saved input/output corresponding relations.
- Press the “RCL” key firstly.
- Then make a random to select one of output channel key 1~8.
- The system will retrieve the saved input/output status and implement current
status switching.
EDID: FIX (fix mode) and TV1 (access the first output channel) selection key.
- FIX
mode: The HX-2388 will supply a set of fixed EDID values to support up to
only 1080P high performance TV.
- TV1
mode: The HX-2388 will access the EDID values of high performance TV
that connected to the first output channel, and copy the EDID value to all the
input channels so that the DVD player can support to all the HDTV.
LCD: LCD display shows current HDMI matrix status and operation status.
) Press both the STO and RCL buttons to enter the EQ mode that only takes effective
under RJ-45 Input modules (MX-RJI1_EQ mode). For example as below, make the EQ
value of input channel 2 from 1 to 2. Click the IN button 2 on the front panel again; the
EQ value will become 2 until to the value 8, then the value will return back to 1.
Click again
IN