Avlink PG-H1 - Manual (Page 13)

12
Under the Func/Setup configurations allow you to set the
DVI
(mode)/RGB (color) and HDCP functions.
„
MOD: Support DVI/H8/H10/H12 modes, please press
the indicated key to switch among these modes.
„
CSC: Support RGE/YUV444/YUV422 modes, please
press the indicated key to switch among these modes.
„
HDCP: Press the indicated key to Enable/Disable
HDCP function.
„
“ ”: Confirm the changed value.
b. Info: Show you the status information of the PG-H1
including Timing Info/HTPLG Info/HDCP Info.
Please use the “▲” and “▼” function keys to switch
the Timing Info/HTPLG Info/HDCP Info.
Under the Timing Info screen, please press the “ ” to
enter the Timing Info configuration screen including:
Pixel Clock
Horizontal Total
Horizontal Active
Horizontal Front Porch
Horizontal Back Porch
Horizontal Sync Width
Horizontal Polarity
Vertical Total
Vertical Active
Vertical Front Porch
Vertical Back Porch
Vertical Sync Width
Vertical Polarity
Video Code (for EIA861B definition)
Under the Info configuration, use the “▲” and “▼” function
keys to switch to the HTPLG Info option as below: