Avlink PG-H1 - Manual (Page 14)

13
Under the HTPLG Info screen, please press the “ ” to
enter the HTPLG Info configuration screen as below:
For the HTPLG Info will show you the Hot Plug Pin of
HDMI Connector
status.
Under the Info configuration, use the “▲” and “▼” function
keys to switch to the HDCP Info option as below:
Under the HDCP Info screen, please press the “ ” to enter
the HDCP Info configuration screen as below:
For the HDCP Info will show you the HDCP status
including:
Rx Attached
Read EDID
Transmit DVI/HDMI
Validate BKSV
Exchanges KSVs
Encryption
Ri = xxxx
3.3.4 Hky (Hot key) configuration
Press the Hky indicated key, the Hky page 1 configuration
screen will be showed as below: