Avlink PG-H1 - Manual (Page 7)

6
Chapter 2 Connection
2.1 Preparation
Caution
Please power off the digital monitor and PG-H1 before you
begin the connection.
2.1.1 Plugs
PG-H1 supports you up to 4 replaceable plugs (for USA, UK,
Europe and Australia DC plugs.). Please depend on where
the location is to exchange the suitable plug.
US Plug UK Plug AU Plug EU plug
2.1.2 Plug replacement
PG-H1 supports a power adapter DC 12V 1.25A with a
plastic ring to protect the connector. Before you to connect
the adapter, you have to dismantle the plastic ring firstly.
Refer to the pictures as below to dismantle the plastic ring.
Caution
Please also to pull down the slider to exchange the suitable
plug.