Avlink PG-H1 - Manual (Page 3)

2
Chapter 1 Introduction
PG-H1 is a test pattern generator designed to be a useful
tool for the new generation of digital video/monitor products.
PG-H1 supports up 27 resolutions and 34 patterns for you
to test and calibrate a digital video/monitor. Further, it also
can improve the quality of digital video/monitor with side by
side comparisons. Through the friendly interface and smart
design, not only you can easy to use the PG-H1 but also
you can reduce your test expenditure.
Caution
To avoid and minimize the risk of damage to PG-H1, please
pay attention to the safety instructions even though the
PG-H1 had been tested for conformance to safety
requirements and certified for international using.
ƒ Follow all instructions marked on the device during using.
ƒ Do not attempt to maintain the device by yourself, any
faults, please contact your vendor.
ƒ Provide proper ventilation and air circulation and do not
use near water.
ƒ It is better to keep it in a dry environment.
ƒ Only using the power adapter and connection cables that
are supported with the device.
ƒ After purchasing and before using the PG-H1 first time,
please charge it continuously for more than 16 hours.
ƒ It is better to charge the battery when the battery power
indicator becomes low.
ƒ The PG-H1 will save the last setting values automatically.
ƒ Do not use liquid or aerosol cleaners to clean the device.
ƒ Always unplug the power to the device before cleaning.
1.1 Package Contents
ƒ 1 HDMI pattern generator PG-H1
ƒ 1 power adapter DC 12V, 4 replaceable plugs (for USA,
UK, Europe and Australia DC plugs.)
ƒ 1 user manual
ƒ 1 HDMI 1.2M cable
All packages have been checked carefully for their
completeness and functionality before shipped. Please
contact with your vendor if any items listed as above are
missed or damaged.