AvMap Geosat 4 TRAVEL Europe - Manual (Page 14)

14
3.1 Starting
1. Switch on the navigator by pressing the
PAGE button.
2. Geosat 4 TRAVEL will display the software
and cartography display screen and then the
user is asked to choose the desired mode:
passenger or driver. An unaccompanied
driver should select the Driver mode.
3. Select one of the two buttons with the
JOYSTICK using the left or right arrow.
The selected button is outlined by a dotted
line.
4. Press + to confirm.
5. Wait for the satellite search to be completed
to see your position on the map.
Driving mode
The driver should NOT consult the navigator
while driving.
For this reason, when Driver mode is chosen,
the map view is automatically deactivated.
The only accessible pages are the trip
computer and the list of driving instructions.
For further details, read par. 5.2.
Passenger mode
This mode allows access to all the navigation
functions.
Powering down
To power down the Geosat 4 TRAVEL press
and hold the PAGE button for 4 seconds.
When the power supply cable is removed,
the message “powering off in 30 seconds”
appears. To avoid powering down, press
+. Press any other button to power down
immediately.
3.2 Setting the first destination
To plan a route, the easiest and fastest way is
take the current GPS position as the departure
point and insert the desired destination.
1. Press the FIND button. The Find menu will
now open.
2. In the Find menu select Address and press
3. Set the destination