AvMap Geosat 4 TRAVEL Europe - Manual (Page 29)

2
The memory is initialised automatically and
prepared for saving the data. The space
already used on the Secure Digital is shown
in the lower part of the display.
2. Press the MENU button. The File menu
will open.
3. Select Save and press the + button to
confirm.
4. The Save to disc window will open. The
Name field is outlined with a dotted line,
Press the + button to open the virtual
keyboard.
5. Insert the name for the file using the
JOYSTICK to select the letters. After each
letter, press the + button. When the name
is completed select ENT on the virtual
keyboard and confirm by pressing the +
button.
6. Move the JOYSTICK to select Type, press
the + button and select the type of data to
be saved – i.e. Marks or Tracks. Press the
+ button to confirm.
7. Move the JOYSTICK to select OK and press
the + button to confirm.
8. A warning message will be displayed. Press
the + button to save the Marks.
It is possible to save up to 1000 Marks.
After a RAM clear or a software update you
can reload previously saved Marks:
1. Press the MENU button twice, select
File manager and press the + button to
confirm.
2. Select the saved file that contains the Mark
to be reloaded. Press the MENU button.
The File menu will open.
3. Select Load and press the + button. A
warning message will open. To load the
Marks select OK and press the + button to
confirm.
How to delete the user data:
To permanently delete a file containing user
data (your Marks/Tracks):
1. Press the MENU button twice, select
File manager and press the + button to
confirm.
2. Select the file to be deleted. Press the
MENU button. The File menu will open.
3. Select Delete and press the + button. A
warning message will be displayed. To
delete the Marks/Tracks select OK and
press the + button to confirm.
It is not possible to overwrite the content of
an existing file. The refresh option is used to
read the content of the Secure Digital card
again when the saved marks folder(s) have
been updated.