AvMap Geosat 4 TRAVEL Europe - Manual (Page 28)

2
changed into the HOME icon.
You can then set home as your destination
with this quick command:
1. Press the MENU button. The Navigation
menu will open.
2. From Navigation from my GPS position
select Drive me HOME and press the +
button to confirm.
7.6 Mark alarm
Geosat 4 TRAVEL can alert you with a
visible message and a beep when you are in
proximity of one or more Marks associated
with the danger icon.
To activate this function observe the following
instructions:
1. Press the MENU button, select System
Setup and press the + button to confirm.
2. Move the JOYSTICK to the right to select
the Alarm folder and press the + button to
confirm.
3. Select Mark alarm and press the + button
to confirm. In the Alarm radius field, you
can set the radius within which to activate
the alarm.
For further details read par. 11.7
Only Marks associated to the danger icon
can be alerted.
7.7 Sending and receiving Marks
There is an accessory software called
PCPlanner that makes it possible to transfer
marks and data from a PC to Geosat 4 TRAVEL
and vice versa.
The transfer is made through serial
connection and not directly on the secure
digital memory.
7.8 File manager
Using Secure Digital memory cards with
different versions of the navigation software
or updating the map data may cause the loss
of your user Marks.
To avoid this inconvenience it is recommended
that you save the Marks and tracks that you
have created.
How to save user files:
1. Press the MENU button twice, select
File manager and press the + button to
confirm.
2. Select Set as HOME and press the +
button to confirm. The Mark icon will be