AvMap Geosat 4 TRAVEL Europe - Manual (Page 17)

1
the + button.
How to set the destination:
1. Once the departure has been set, return
to the Find address menu. Insert the
destination address following the same
procedure as for the departure then press
MENU button.
2. The Find menu will now open. From Route
planning, select Set as destination and
calculate and press the + button.
instructions:
1. Press the MENU button. The Navigation
menu will now open.
2. Select Delete route.
3. Press the + button to confirm.
4.3 Reversing a route
To reverse the last route planned, follow
these instructions:
1. Press the MENU button. The Navigation
menu will now open.
2. Select Reverse route.
3. Press the + button to confirm.
4.4 Simulation
After having planned a route as described in
par. 3.4 it is possible to simulate the naviga-
tion.
1. Press the MENU button three times.
2. The System Setup menu will now open.
Move the JOYSTICK to the right to select
the Simulation folder and press the +
button to confirm.
3. Press the + button to start the simulation.
4. Select Speed with the JOYSTICK and press
the + button to confirm.
5. Select the numbers with the right and left
arrow, and set the value with the up arrow
or down arrow.
For further details read par. 11.11.
4.2 Deleting a route
To delete the last route planned, follow these