AvMap Geosat 4 TRAVEL Europe - Manual (Page 20)

20
the + button to confirm. If more than one
road has been blocked, you can select
Remove all blocked roads and press the +
button to confirm.
5.3 Reaching Walkways (Pedestrian
areas)
If the destination is a walkway, a window will
warn you that the street is not accessible. In
this case you can choose to activate the walk-
way or to go to the nearest accessible road.
1. Select, with the JOYSTICK, Enable
walkways or Use closest road.
2. Press the + button to confirm.
It is also possible to activate/deactivate the
walkways following the procedure described
in par. 10.5.
5.4 Navigating Off road
With Geosat 4 TRAVEL it is possible to plan a
route off road.
1. Press the MENU button three times.
2. The System Set up menu will now open.
Move the JOYSTICK to the right and select
the Routing folder and press the + button
to confirm.
3. Select Off Road from Route preferences.
4. It is now possible to select the departure
point off-road.
A-B Function
The A-B function is particularly useful during
off road navigation. This function allows you
to calculate the distance “as the crow flies”
between point A and B on the map:
1. Press the centre of the JOYSTICK. The
Function Menu will now open.
2. Select A-B Function and press the + button
to confirm. An “A” will appear in place of
the selected point on the Map.
3. Move the cursor to another point on the
map, repeat steps 1 and 2 to set the point
B.
4. A “B” will appear in place of the set point