C&D Technologies RS-1826 Liberty Series 1000 FA Battery User Manual
Page 8
6
PART 1
RECEIVING AND INSTALLATION
SECTION 1 - RECEIVING
1.1.1 General Information and Precautions
This battery is designed for industrial use only and is not intended for
application in vehicular starting, lighting, and ignition, and/or
operation of portable tools and appliances. Use only in
accordance with manufacturer's written instructions. Use of this
product other than in accordance with C&D TECHNOLOGIES, INC.’s
written instructions may produce hazardous and unsafe operating
conditions, leading to damage of equipment and/or personal injury.
1.1.2 Safety
Charge only in accordance with C&D TECHNOLOGIES, INC.’s
operating instructions.
Do not expose to open flame or electrical arc.
Do not tamper with cell covers or vents. There is no need to remove
vents for water addition.
Observe all precautions shown on the inside cover of this manual and
page 2.
1.1.3 Packing, Inspection at time of delivery
Resonable precautions have been taken to pack the battery for shipment
to ensure its safe arrival. As soon as you receive the battery, inspect the
packing material for evidence of damage in transit. If the packing
material is physically damaged or stains are present, make a notation on
the delivery receipt
before you accept the shipment / delivery.
Note: Freight Carriers generally require that concealed damage be
inspected by the carriers representative within 15 days from date of
delivery to determine responsibility. The resolution of such claims
may extend up to 9 months.
1.1.4 Accessories package
Check the contents of the accessories package against the enclosed
packing list to determine all connecting hardware and cables have been
received. Place accessories in a safe location where they can be easily
retrieved. If parts are missing from the package, contact the customer
service department at C&D TECHNOLOGIES, attention Customer
Service, 1400 Union Meeting Road, Blue Bell, PA 19422, 800-543-
8630, within 30 days of receipt at original destination.