Chameleon Labs 7602 MKII X-Mod - Manual (Page 14)

MODEL NUMBER ___________________________
SERIAL NUMBER ____________________________
DATE OF PURCHASE __________________________
PURCHASED FROM ___________________________
Specifications
Input impedance:
Microphone – 300 or 1,200 ohms
Line – 10,000 ohms
D.I. – 100,000 ohms
Sensitivity:
Microphone – -80dBm to -20 dBm in 5dB steps for 0 dBm
output.
Line – -20 dBm to +10 dBm in 5 dB steps for 0 dBm output.
Noise:
Measured at 80 dB of gain with 200 ohm input
termination, without 20Hz to 20kHz to assist in
filtering out noise.
-49dBu with final output stage at 50% EIN -129
dBu;
14