Chameleon Labs 7602 MKII X-Mod - Manual (Page 15)

-46dBu with final output stage at unity EIN -126
dBu;
-56dBu without final output stage EIN -136 dBu.
Controls either “flat” or switched out.
Output:
Balanced and floating to feed a 600 ohm load.
Maximum output +26 dBm into 600 ohms, or +20dBm into
150 ohms.
Output impedance:
600 ohms, balanced (source impedance 75 ohms).
Frequency Response:
11 Hz – 77.65 kHz – 3 dB.
Level variation is less than 0.2%.
Distortion:
1k Hz = 0.0245%
All tests results were measured using a Stanford Research
Model SR780 signal analyzer and a Fluke 8060a.
Input signal was 1v rms input signal and 20dBu output
signal.
15