Chameleon Labs 7602 MKII X-Mod - Manual (Page 7)

Connecting the Preamplifier / Equalizer
Audio Connection
Microphone input connections are made with the
female XLR connector on the rear of the unit. This
connector is wired with pin 2 HOT, pin 3 common
and pin 1 is ground (shield). The 48VDC power is
supplied on pins 2 and 3.
The Instrument (DI) connection is made using the
balanced ¼” TRS jack on the front panel. The
connector is wired with the TIP being positive, The
RING being negative and the SLEEVE being ground
(shield).
Line input connections are made with the male XLR
connector on the rear of the unit. This connector is
wired with pin 2 HOT, pin 3 common and pin 1 is
ground (shield).
Output connection is made using the male XLR
connector on the rear of the unit. This connector is
wired with pin 2 HOT, pin 3 common and pin 1 is
ground (shield).
7