CHEVROLET 2012 Equinox - Manual (Page 16)

Black plate (10,1) Chevrolet Equinox Owner Manual - 2012
1-10 In Brief
Power Reclining Seatbacks
To adjust a power seatback,
if available:
. Tilt the top of the control
rearward to recline.
. Tilt the top of the control forward
to raise.
See Reclining Seatbacks on
page 3‑5.
Memory Features
On vehicles with the memory
feature, the “1” and “2” buttons on
the outboard side of the driver seat
are used to manually save and
recall the driver seat and outside
mirror positions. These manually
stored positions are referred to as
Button Memory positions.
The vehicle will also automatically
save driver seat and outside mirror
positions to the current driver
Remote Keyless Entry (RKE)
transmitter when the ignition is
turned off. These automatically
stored positions are referred to as
RKE Memory positions.
Storing Button Memory Positions
To save positions into Button
Memory:
1. Adjust the driver seat, seatback
recliner, and both outside mirrors
to the desired driving positions.
2. Press and hold MEM (Memory)
and “1” at the same time until a
beep sounds.
3. Repeat Steps 1 and 2 for a
second driver using “2.”
To recall the manually saved Button
Memory positions, press and hold
“1” or “2.” The driver seat and
outside mirrors move to the
positions stored to those buttons
when pressed. Releasing “1” or “2”
before the stored positions are
reached stops the recall.