CHEVROLET 2012 Equinox - Manual (Page 313)

Black plate (33,1) Chevrolet Equinox Owner Manual - 2012
Vehicle Care 10-33
Headlamps, Front Turn
Signal, Sidemarker, and
Parking Lamps
A. Low Beam Headlamp
B. High Beam headlamp
C. Park/Turn Signal Lamp
D. Side Marker Lamp
To replace:
1. Turn the tire to reach the access
port cap located on front of
wheel well cover.
A. Screw
B. Access Port Cap
2. Remove screw (A) and turn
access port cap (B)
counterclockwise to remove.
3. If replacing low/high headlamp
bulb, remove the dust cover cap
from the back of the headlamp
housing by turning the cap
counterclockwise.
4. Turn the bulb socket
counterclockwise to remove from
lamp assembly.
5. Remove the bulb from the
socket or disconnect bulb
assembly from harness
connector.
6. Install new bulb.
7. Reinstall the lamp socket to
lamp assembly turning
clockwise.
8. Replace the dust cover cap on
headlamps.
9. Reinstall the wheel well cover
access port cap and secure by
installing screw.