CHEVROLET 2012 Equinox - Manual (Page 170)

Black plate (10,1) Chevrolet Equinox Owner Manual - 2012
7-10 Infotainment System
English and Metric Unit
Conversion
To change the display units between
English and metric units, see Driver
Information Center (DIC) on
page 5‑24 for more information.
Cleaning the Display
Notice: Using abrasive cleaners
when cleaning glass surfaces
could scratch the glass. Use only
a soft cloth and do not spray
cleaner directly on the system as
it could affect the mechanical
parts.
Do not wipe the panel with a hard
cloth or use a volatile liquid such as
paint thinner; it could scratch the
surface or erase the characters on
the buttons.
Operation
Controls
The infotainment system is operated
by using the pushbuttons,
multifunction knobs, display menus,
and steering wheel controls,
if equipped.
Turning the System On or Off
VOL/
O
(Volume/Power): Press to
turn the system on and off.
Automatic Switch‐Off
If the infotainment system has been
turned on after the ignition is turned
off, the system will turn off
automatically after 10 minutes.
Volume Control
VOL/
O
(Volume/Power): Turn to
adjust the volume.
5 / ? (Mute): For vehicles with
OnStar, press and hold
5
/
?
to
mute the infotainment system. Press
and hold
5
/
?
again, or turn the
VOL/ O knob to cancel mute.
For vehicles without OnStar, press
5 / ? to mute the infotainment
system. Press
5
/
?
again, or turn
the VOL/
O
knob to cancel mute.
Menu System
Controls
The MENU/SEL knob and the
E BACK button are used to
navigate the menu system.
MENU/SEL (Menu/Select):
Press to:
. Enter the menu system.
. Select or activate the highlighted
menu option.
. Confirm a set value.
. Turn a system setting on or off.