Seats and restraints 3-61 – CHEVROLET 2012 Colorado User Manual

Page 109

Advertising
background image

Black plate (61,1)

Chevrolet Colorado Owner Manual - 2012

Seats and Restraints

3-61

In Canada, the law requires that
forward-facing child restraints have
a top tether, and that the tether be
attached.

You will be using the lap-shoulder
belt to secure the child restraint in
this position. Follow the instructions
that came with the child restraint.

1. Move the seat as far back as it

will go before securing the
forward-facing child restraint.

2. Put the child restraint on

the seat.

3. Pick up the latch plate, and run

the lap and shoulder portions of
the vehicle's safety belt through
or around the restraint. The child
restraint instructions will show
you how.

4. Push the latch plate into the

buckle until it clicks.

Position the release button on
the buckle so that the safety belt
could be quickly unbuckled
if necessary.

5. Pull the shoulder belt all the way

out of the retractor to set the
lock. When the retractor lock is
set, the belt can be tightened but
not pulled out of the retractor.

6. If the vehicle does not have a

rear seat and the child restraint
manufacturer recommends using
a top tether anchor, attach the
top tether to the top tether
anchor. Refer to the instructions
that came with the child restraint
and to Lower Anchors and
Tethers for Children (LATCH
System) on page 3‑43
.

Advertising