CHEVROLET 2012 Colorado - Manual (Page 226)

Black plate (44,1) Chevrolet Colorado Owner Manual - 2012
9-44 Driving and Operating
7. Turn the engine off by turning
the key to ACC/ACCESSORY.
8. Place the transmission shift
lever in P (Park), or 1 (First) for
vehicles that have a manual
transmission.
9. Turn the ignition to LOCK/OFF.
Shifting Out of Neutral
After towing the vehicle, you will
have to shift out of N (Neutral) in
order to drive. To shift out of
N (Neutral), do the following:
1. Set the parking brake and apply
the regular brake pedal.
2. Start a vehicle with an automatic
transmission in P (Park). Use
1 (First) for vehicles with a
manual transmission.
3. Shift the transmission to
N (Neutral), or press the clutch
pedal for vehicles with a manual
transmission.
4. Press the button for the desired
transfer case shift position
(Two-Wheel High, Four-Wheel
High, or Four-Wheel Low).
5. After the transfer case has
shifted out of N (Neutral), the
indicator light will go out.
6. Release the parking brake.
7. Shift the transmission to the
desired position.
Brakes
Antilock Brake
System (ABS)
This vehicle has the Antilock Brake
System (ABS), an advanced
electronic braking system that helps
prevent a braking skid.
When the engine is started and the
vehicle begins to drive away, ABS
checks itself. A momentary motor or
clicking noise might be heard while
this test is going on, and it might
even be noticed that the brake
pedal moves a little. This is normal.
If there is a problem with ABS, this
warning light stays on. See Antilock
Brake System (ABS) Warning Light
on page 5‑16.