CHEVROLET 2012 Colorado - Manual (Page 97)

Black plate (49,1) Chevrolet Colorado Owner Manual - 2012
Seats and Restraints 3-49
{
WARNING
Children can be seriously injured
or strangled if a shoulder belt is
wrapped around their neck and
the safety belt continues to
tighten. Buckle any unused safety
belts behind the child restraint so
children cannot reach them. Pull
the shoulder belt all the way out
of the retractor to set the lock,
if the vehicle has one, after the
child restraint has been installed.
Notice: Do not let the LATCH
attachments rub against the
vehicle’s safety belts. This may
damage these parts. If necessary,
move buckled safety belts to
avoid rubbing the LATCH
attachments.
Do not fold the empty rear seat
with a safety belt buckled. This
could damage the safety belt or
the seat. Unbuckle and return the
safety belt to its stowed position,
before folding the seat.
Crew Cab — Rear Seat
1. Put the child restraint on
the seat.
2. If the child restraint
manufacturer's instructions
recommend that the top tether
be attached, attach the top
tether to the top tether
anchor (A). Refer to the child
restraint instructions and the
following steps:
2.1. Pull the seatback forward to
access the top tether
anchors (A). See Rear
Seats (Crew Cab) on
page 3‑8 or Rear Seats
(Extended Cab) on
page 3‑8.
2.2. Route the top tether
according to your child
restraint instructions and
the following instructions:
If the child restraint has a
single tether, route the
tether over the seatback.