CHEVROLET 2012 Colorado User Manual
Page 58
Black plate (10,1)
Chevrolet Colorado Owner Manual - 2012
3-10
Seats and Restraints
To return a seatback to the upright
position:
1. Lift the seatback up and push it
rearward.
{
WARNING
If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.
2. Push and pull on the seatback to
make sure it is locked in place.
{
WARNING
A safety belt that is improperly
routed, not properly attached,
or twisted will not provide the
protection needed in a crash. The
person wearing the belt could be
seriously injured. After raising the
rear seatback, always check to be
sure that the safety belts are
properly routed and attached, and
are not twisted.
3. Reconnect the center safety belt
latch plate to the mini-buckle.
Make sure the safety belt is not
twisted.
4. Push and pull on the latch plate
to be sure it is secure.
When the seatback is not in use, it
should be kept in the upright, locked
position.