Brake system warning light, Brake system warning, Light -21 – CHEVROLET 2011 Avalanche User Manual

Page 159: Instruments and controls 5-21

Advertising
background image

Black plate (21,1)

Chevrolet Avalanche Owner Manual - 2011

Instruments and Controls

5-21

Emissions Inspection and
Maintenance Programs

Some state/provincial and local
governments may have programs to
inspect the on-vehicle emission
control equipment. For the
inspection, the emission system test
equipment is connected to the
vehicle’s Data Link
Connector (DLC).

The DLC is under the instrument
panel to the left of the steering
wheel. See your dealer if assistance
is needed.

The vehicle may not pass
inspection if:

.

The malfunction indicator lamp is
on with the engine running, or if
the light does not come on when
the ignition is turned to ON/RUN
while the engine is off.

.

The critical emission control
systems have not been
completely diagnosed by the
system. This can happen if the
battery has recently been
replaced or if the battery has run
down. The diagnostic system
evaluates critical emission
control systems during normal
driving. This can take
several days of routine driving.
If this has been done and the
vehicle still does not pass the
inspection, your dealer can
prepare the vehicle for
inspection.

Brake System Warning
Light

With the ignition on, the brake
system warning light comes on
when the parking brake is set. If the
vehicle is driven with the parking
brake engaged, a chime sounds
when the vehicle speed is greater
than 8 km/h (5 mph).

The vehicle brake system consists
of two hydraulic circuits. If one
circuit is not working, the remaining
circuit can still work to stop the
vehicle. For normal braking
performance, both circuits need to
be working.

Advertising