CHEVROLET 2011 Avalanche User Manual

Page 40

Advertising
background image

Black plate (4,1)

Chevrolet Avalanche Owner Manual - 2011

2-4

Keys, Doors and Windows

If enabled through the DIC, the turn
signal lamps flash twice to indicate
unlocking has occurred. See Vehicle
Personalization (With DIC Buttons)
on page 5‑44
.
If enabled through the
DIC, the exterior lights may turn on.
See “APPROACH LIGHTING” under
Vehicle Personalization (With DIC
Buttons) on page 5‑44
.

Pressing

K

on the RKE transmitter

disarms the content theft‐deterrent
system. See Anti-Theft Alarm
System on page 2‑17
.

L

(Vehicle Locator/Panic

Alarm): Press and release to
locate the vehicle. The turn signal
lamps flash and the horn sounds
three times.

Press and hold

L

for more than

two seconds to activate the panic
alarm. The turn signal lamps flash
and the horn sounds repeatedly for
30 seconds. The alarm turns off
when the ignition is moved to ON/

RUN or

L

is pressed again. The

ignition must be in LOCK/OFF for
the panic alarm to work.

The vehicle comes with two
transmitters. Each transmitter will
have a number on it, “1” or “2”.
These numbers correspond to the
driver of the vehicle. For example,
the memory seat position for driver
1 will be recalled when using the
transmitter labeled “1”, if enabled
through the DIC. See “Memory
Seat, Mirrors, and Pedals” under
Power Seat Adjustment on page 3‑4
and Vehicle Personalization (With
DIC Buttons) on page 5‑44
for more
information.

Programming Transmitters to
the Vehicle

Only RKE transmitters programmed
to this vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased and
programmed through your dealer.
When the replacement transmitter is
programmed to this vehicle, all
remaining transmitters must also be

reprogrammed. Any lost or stolen
transmitters will no longer work
once the new transmitter is
programmed. Each vehicle can
have up to eight transmitters
programmed to it. See your dealer
to program transmitters to the
vehicle.

Battery Replacement

Replace the battery if the REPLACE
BATTERY IN REMOTE KEY
message displays in the DIC. See
“REPLACE BATTERY IN REMOTE
KEY” under Key and Lock
Messages on page 5‑39
for
additional information.

Notice: When replacing the
battery, do not touch any of the
circuitry on the transmitter. Static
from your body could damage the
transmitter.

Advertising