CHEVROLET 2011 Avalanche - Manual (Page 395)

Black plate (39,1) Chevrolet Avalanche Owner Manual - 2011
Vehicle Care 10-39
4. Turn the bulb socket
counterclockwise to remove it
from the taillamp assembly.
5. Pull the old bulb straight out
from the bulb socket.
6. Press a new bulb into the bulb
socket and insert the bulb socket
into the taillamp assembly. Turn
the bulb socket clockwise into
the taillamp assembly until it
clicks.
7. Reinstall the taillamp assembly
making sure to line up the pins
with the vehicle.
License Plate Lamp
To replace one of these bulbs:
1. Reach under the rear bumper for
the bulb socket. Turn the bulb
socket counterclockwise and pull
the bulb socket out of the lamp
assembly.
2. Pull the bulb straight out of the
socket.
3. Install the new bulb into the
socket.
4. Reinstall the bulb socket by
turning it clockwise into the lamp
assembly.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Back-up Lamp 7441
License
Plate Lamp
168
Rear Turn Signal
Lamp, Taillamp,
and Stoplamp
3057K
Sidemarker Lamp 194LL
For replacement bulbs not listed
here, contact your dealer.