Seats and restraints 3-5 – CHEVROLET 2011 Avalanche User Manual

Page 67

Advertising
background image

Black plate (5,1)

Chevrolet Avalanche Owner Manual - 2011

Seats and Restraints

3-5

Memory Remote Recall

The memory feature can recall the
driver seat, outside mirrors, and
pedals, if available, to stored
positions when entering the vehicle.

To activate, unlock the driver door
with the Remote Keyless
Entry (RKE) transmitter. The driver
seat, outside mirrors, and adjustable
pedals, if available, will move to the
memory position associated with the
transmitter used to unlock the
vehicle.

This feature can be turned on or off
using the vehicle personalization
menu. See “Memory Seat Recall”
under Vehicle Personalization (With
DIC Buttons) on page 5‑44
for more
information.

To stop recall movement, press one
of the power seat controls, memory
buttons, or power mirror buttons,
or the adjustable pedal switch.

If something has blocked the driver
seat and/or the adjustable pedals
while recalling a memory position,
the recall may stop. Remove the
obstruction; then press and hold the
appropriate manual control for the
memory item that is not recalling for
two seconds. Try recalling the
memory position again by pressing
the appropriate memory button.
If the memory position is still not
recalling, see the dealer for service.

Easy Exit Driver Seat

This feature can move the seat
rearward to allow extra room to exit
the vehicle.

B

(Easy Exit Driver Seat): Press

to recall the easy exit seat position.
The vehicle must be in P (Park).

If the easy exit seat feature is
programmed on in the vehicle
personalization menu, automatic
seat movement occurs when the
ignition key is removed.

A single beep sounds. The driver
seat moves back approximately
8 cm (3 in). To move the seat back
farther, press the easy exit seat
button again until the seat is all the
way back.

If something has blocked the driver
seat while recalling the exit position,
the recall may stop. Remove the
obstruction; then press and hold the
power seat control rearward for
two seconds. Try recalling the exit
position again. If the exit position is
still not recalling, see the dealer for
service.

See “Easy Exit Recall” and “Easy
Exit Setup” under Vehicle
Personalization (With DIC Buttons)
on page 5‑44
for more information.

Advertising