Whirlpool DISHWASHERS - Manual (Page 17)

L O A D I N G Y O U R D I S H W A S H E R
Mixed load
• Load plastic items only in the top rack. Only
plastic hems marked “dishwasher safe” are
recommended.
• Load plastic hems so the force of the spray
does not move them during the cycle.
• Plastic items can be melted in the bottom
rack.
Utensil load
• Small bowls, pans and other utensils can be
placed in the top rack.
Adjustable 3-position top rack
(on some models)
You can raise or lower the rack to fh tall hems
in ehher the top or bottom rack. The high and
low positions are marked on the adjuster on the
side facing the center of the dishwasher.
1. Hold the top rack whh one hand near the
adjuster.
2. Pull the top of the adjuster lever out with the
other hand.
3. Lift or lower the rack to one of the preset
poshions.
4. Release the adjuster lever.
5. Repeat Steps 1-4 for the three remaining
adjusters as needed. The four adjusters can
be raised or lowered separately or together,
as desired. The top rack does not have to be
level.
Infinite adjustable top rack
(on some models)
You can raise or lower the rack to fit tall items
in either the top or bottom rack. The top rack
does not have to be level.
• Turn the knob clockwise to raise a side of the
rack.
• Turn the knob counterclockwise to lower a
side of the rack.
Do not cover third level wash
Raise
Lower
17