Cabletron Systems EMM-E6 - Manual (Page 66)

Link/Seg Traps
4-6 Enabling and Disabling Link/Seg Traps
Viewing and Configuring Link/Seg Traps for Ports
To enable or disable Link and Segmentation traps for individual ports:
1. In the Repeater Link/Seg Traps window, select a repeater in the scroll list.
2. Click mouse button 1 on ; the port traps window, Figure 4-4 , will
appear.
Figure 4-4. The Port Traps Window
3. In the port traps window, click mouse button 1 to select the port or ports for
which you wish to configure traps. If the Set Trap Status For field displays
Selected Ports (the default setting), you can click to select any ports; to de-
select any highlighted port, click on it again. If the selection
All Ports on
Module is displayed in the Set Trap Status For field, you can select only one
port at a time; trap status will be set for all ports on the same module as the
selected port. If the selection
All Ports on Repeater is displayed in the Set
Trap Status For field, all available ports will be automatically selected; if you
de-select any port, the Set Trap Status For field will automatically revert to
the
Selected Ports setting. To change the setting in the Set Trap Status For
field, click on the currently displayed setting, and drag down to select a new
setting.
4. Click on the appropriate selection in the Link Traps field to Enable or Disable
link traps for the selected modules, as desired.