Cabletron Systems EMM-E6 - Manual (Page 95)

Configuring Security 7-9
Security
Figure 7-3. The Addresses Window
3. On the left side of the window, the Learned Addresses list box will display all
source addresses detected by the selected port during the last aging interval
(see Chapter 6, Source Address, for more information on the aging interval).
On the right side of the window, the Secure Addresses list box will display
the source addresses which have been secured for that port. Remember, as
long as the port is in a securable state, the first two addresses detected by the
port are automatically secured; you can add additional addresses, or delete
the default addresses and secure new ones, as follows:
a. To add a learned address, click to highlight the desired address in the
Learned Addresses list box, then click on
. A confirmation
window will appear; click on Yes to secure the selected address.
b. To delete a secured address, click in the Secure Addresses list box to
highlight the address you wish to delete, then click on
. A
confirmation window will appear; click on Yes to delete the address, or No
to leave the address secured.
c. To add an address not yet detected by the port, make sure no Learned
Addresses are highlighted, then click on
; the Add MAC Address
window, Figure 7-4 , will appear.
NOTE
If security has never been enabled, new addresses will replace any existing learned
addresses. If security has ever been enabled — even if it is not currently enabled — new
addresses will be stored in addition to any learned addresses.