Cabletron Systems EMM-E6 - Manual (Page 86)

Source Addressing
6-12 Finding a Source Address
Figure 6-5. Find Source Address Window
2. In the MAC Address field, enter the source address you wish to locate in a
hexadecimal (XX:XX:XX:XX:XX:XX) format.
3. Click on . If the address is in the table at the time the search is
initiated, the remaining fields in the window will display the module and port
through which the address is communicating with the EMM-E6. If the address
is not in the table, the message MAC Address Not Found will display in the
window. See
Figure 6-6 , below.
Figure 6-6. Results of MAC Address Search
4. Click on to exit the window.