Country Flame INGLS 24-N - Manual (Page 17)

Version 1.0b 17
INSTALLATION, GAS LOGS
STEP 7:
STEP 7 begins the process of installing the six logs that make up the Inglenook log set. It is imperative that
these logs are installed exactly as is shown in FIGURE 15 through FIGURE 21. Failure to install the gas
logs correctly will cause the Inglenook gas log system to burn inefficiently. Inefficient gas burns can create
a significant amount of soot. WARNING: Do not reconfigure the logs in any different formation other
than what is shown in this manual. Each log can be located in the log retainer or with pins or has pins that
need to be installed in it to ensure proper connection to the next log being installed.
FIGURE 15: FIRST LOG INSTALLATION
FIGURE 16: SECOND LOG INSTALLATION