Flash button (continued), Conference button, To initiate – GE 2-9435 User Manual

Page 14: Memory, Storing

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

FLASH BUTTON (continued)

1. PICK-UP Handset or PRESS | SPEAKER | .

2. PRESS I STORE/in | #

| 1-9 | i

STORE/in

FLASH I

Numbered Button Equal to duration

in tenths of a second

3.

HANG-UP Handset, or PRESS | SPEAKER |

CONFERENCE BUTTON

_________________

Enables you to carry on 3-way conversation using Lines 1 and 2 simultaneously.

To initiate:

(Place 1st party on HOLD)

1. PRESS alternate | LINE | .

2. PRESS and RELEASE hook switch.

3. DIAL phone number for 2nd party.

4. PRESS CONF | and TALK to both parties.

5. When finished, PRESS Line 1 or 2 button to cancel CONF j .

6. Then, HANG UP or PRESS | SPEAKER | .

MEMORY

Each of the 16 MEMORY buttons is capable of storing 2 separate telephone
numbers of up to 16 digits. Each MEMORY button accesses an UPPER and a
LOWER memory store position. The telephone numbers stored in the upper position

can be automatically dialed with one touch. Those in the lower position are

automatically dialed with two touches (Shift + Memory Location).

STORING

Upper Store Positions:

1. PICK-UP Handset, or PRESS | SPEAKER |

2. PRESS I STORE/in | Phone Number #

3. HANG-UP Handset, or PRESS | SPEAKER |

store/IN

1

J

MEWlOflY

4.

WRITE Name or number of party stored in corresponding

memory iocation on white section of

OWECTOHVCARD

(NOTE: To remove Directory Plastic Cover, pull up on latch located at

center top edge of Directory and lift off cover.)

15

Advertising