Telephone line cord wrap, Telephone outlet requirements – GE 2-9435 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
6. Connect white straight telephone line cord
to wall phone outlet.
7. Slip Adapter mounting holes over wall plate
posts © and slide telephone down ©
so Adapter/Base assembly is firmly in place.
8. Return Handset to base.
TELEPHONE LINE CORD WRAP
This telephone is equipped with a Cord Wrap
for the white straight telephone line cord. The
Cord Wrap is located on the bottom of the
Base. To get to it, remove Wall/Desk Adapter
according to previous section. Wrap excess
cord around Cord Wrap. Reconnect Wall/Desk
Adapter to base according to desired mounting
configuration (Wall or Desk).
TELEPHONE OUTLET
REQUIREMENTS
A modular USOC: RJ11C or 2-line RJ14C
outlet jack (example illustrated) is required.
Installation of this telephone in locations with
4-prong jacks or with hard-wired outlets will
require additional Converters (not included).
The dealer from whom you purchased your
phone or a telephone supply store can advise
you regarding the proper Converter.
21