Wall mounting, Turn handset hook, Mount base to wall – GE 2-9435 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WALL MOUNTING
Your GE telephone can easily be mounted on a wall phone plate.
Turn Handset Hook:
HANDSET HOOK
Mount Base to Wall:
1. PICK-UP Handset.
2. SLIDE Handset Hook up and off cradle.
3. ROTATE a half turn and slide back into slot.
• Hook now extends over edge.
1. Turn phone around so back side faces you.
2. Press down and out on the two snap tabs
located on top of Wall/Desk Adapter
3.
Plug white straight cord into Base jack
marked “Lines 1 + 2 ” , and wrap excess
cord.
4. Reverse the Wall/Desk Adapter so that the r
deepest part is at the bottom of the 1
telephone. Place modular plug and about \
3' of the straight telephone line cord j
through opening in center of Wall/Desk ■
Adapter.
5. Reconnect it to the base by putting top end
in first © and snapping in bottom ©
20