Batteries for supplementary power – GE 2-9435 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

BATTERIES FOR

SUPPLEMENTARY POWER

4 “AA”-size alkaline batteries (not included) provide the increased power required to:

• Maintain Speaker Phone volume level for the simultaneous use of the Speaker

Phone and an extension phone in another room.

• Provide the required supplementary power needed for Speaker Phone use

under certain line conditions.

• Provides power for Line 1 and Line 2 In-Use Indicator LED’s.

• Provides power for AUTO BUSY REDIAL feature.

1. If telephone is wall mounted, remove from

mounting.

2. UNPLUG Modular jack from phone wall

outlet.

3.

Remove Wall/Desk Adapter to expose

battery compartment.

4. To remove cover, place a coin or screw­

driver blade behind battery cover tabs at

top and twist slightly to pop open.

5. Remove cover.

6. Install 4 “AA”-size batteries as indicated on

the battery diagram.

7. To replace cover, place small tabs at bottom

center of each cover inside battery com­
partment. Swing coyer and snap in place.

8. PLUG phone into Modular phone

outlet.

Be sure to replace the batteries periodically to maintain full performance of

your Speakerphone. Also, worn out batteries may leak chemicals which can

damage the cabinet and circuitry of your telephone.

22

Advertising