Materials and basic tools needed, Materials needed, Basic tools – Kenmore 153.337213 User Manual
Page 7: Additional tools needed when sweat soldering
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Materials and Basic Tools Needed
Materials Needed
To simplify the installation Sears has available the installation
parts shown below. You may or may not need all of these materi
als, depending on your type of instdlation.
WATER HEATER HEAT
TRAPS HELP REDUCE
HEAT LOSS DUE TO
THERMAL SYPHONtNG
VENT ELBOW
WATER HEATER INSTAL
LATION KIT WITH FLEXI
BLE CONNECTORS FOR
IM” OR 1/1" THREADED
OR COPPER PLUMBING
WATER HEATER STAND 14"x24"xl8"
FOR USE WITH WATER HEATERS
INSTALLED IN RESIDENTIAL
GARAGES HAVING A DIAMETER 24"
OR LESS AND A RATED CAPACITY T5
GALLONS OR LESS
EXMNSION TANKS
FOR THERMAL
EXPANSION CONDI
TIONS AVAILABLE IN
1 GALLON AND S
GALLON CAPACITY
THROUGH LOCAL
SEARS STORE OR
SERVICE CENTERS
VENT PIPE
FLEXIBLE WATER
HEATER GAS CON
NECTOR WITH
FITTINGS
DRAIN PANS AVAILABLE IN 10"
DIAMETER FOR WATER HEATERS
HAVING A DIAMETER 18" OR LESS
AND AVAILABLE IN 28" DIAMETER
FOR WATER HEATERS HAVING A
DIAMETER 26" OR LESS
Basic Tools
You may or may not need all of these tools, depending on your
type of installation. These tools can be purchased at your local
Setts store.
• Pipe Wrenches (2) 14"
• Screwdriver
• Tin Snips
•
6
Foot Tape of Folding Rule
• Garden hlose
• Drill
• Pipe dope or Teflon Tape
GARDEN HOSE
6 FOOT TAPE
PIPE
WRENCH
SLOT-HEAD SCREWDRIVER
I, ■ -iJ-Sjii.'-B
....
PHIU.IPS SCREWDRIVER
TIN SNIPS
ROLL OF TEFLON TAPE
(USE ONLY ON WATER
CONNECTIONS)
PIPE DOPE (SQUEEZE TUBE)
(USE FOR WATER AND
GAS CONNECTIONS)
ADDITIONAL TOOLS NEEDED
WHEN SWEAT SOLDERING
■ Tubing Cutters or Hacksaw
• Propane Torch
• Soft Solder
■ Solder Flux
• Emery Cloth
• Wire Brushes
3/4” WIRE BRUSH
1/2" WIRE BRUSH
ROLL OF LEAD FREE
SOFT SOLDER
PROPANE
TORCH
ROLL OF EMERY
CLOTH
SOLDER FLUX