Kenmore ELECTRIC RANGE 790.4660 - Manual (Page 18)

Setting Oven Controls (con’t)
Setting Preheat
The PREHEAT I pad controls the Preheat feature. The Preheat feature will bring the oven up to temperature and
then indicate when to place the food in the oven. Use this feature when recipes call for preheating. Preheating is not
necessary when roasting or cooking casseroles. The oven can be programmed to preheat at any temperature between
170“Fto550“F.
INSTRUCTIONS
To set the Preheat temperature for 350“F
1. Arrange the interior oven racks.
2. Press (_Sry- " — a n d "BAKE" will appear in the display
(Figure 1).
3. Press
CD CD ®
"3S0” will appear in the display
(Figure2).
4. Press "PRE" and "BAKE" will appear in the display as
the oven heats and reaches 350°F (Figure 3).
Note: After the oven has reached the desired temperature (this
example, 350“F) the control will beep and the
"PRE" light will turn
off and oven temperature will be displayed (Figure 4). If you missed
hearing the beep, you can tell that the oven has reached preheat
temperature if you see the oven temperature showing in the oven
display. Once the oven has preheated,
place food in the oven .
The "BAKE" light will stay on.
Press I
feature.
I when baking is complete orto cancel the preheat
To change Preheat temperature while oven is
preheating (example: changing from 350°F to 425°F)
If it is necessary to change the preheat temperature while the oven
is preheating to the original temperature:
1. While preheating, press . " — a n d "BAKE" will appear
in the display (Figure 5)
2. Enter the new preheat temperature. Press
CD CD CD-
"425°" and "BAKE" will appear in the display (Figure 6).
3. Press "PRE" and "BAKE" will appear in the display as
the oven heats to 425°F (Figure 7). A beep will sound once the
oven temperature reaches 425°F and the display will show
"425°" and "BAKE" (Figure 8).
4. When baking is complete press I
PRESS
CDCDCD
CD CD CD
DISPLAY
Figure 1
350’
Figure 2
Figure 4
Figure 5
Figure 6
íiSSíiifiÉBi
Figure 7
Figure 8
18