Ceramic glass cooktop cleaning & maintenance, General care & cleaning (confd) – Kenmore ELECTRIC RANGE 790.4660 User Manual

Page 38

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Ceramic Glass Cooktop Cleaning & Maintenance

■ Consistent and

propercfeaning is essential to maintaining your Ceramic glass cooktop

General Care & Cleaning (confd)

Prior to using your cooktop for the first time, apply the recommended CookTop® Cleaning Creme to the ceramic surface
(on the web visit

www.sears.com for replacement cooktop cleaner, item number 40079). Buff with a non-abrasive cloth or

no-scratch cleaning pad. This will make cleaning easier when soiled from cooking. The special cooktop cleaning cream
leaves a protective finish on the glass to help prevent scratches and abrasions.

Sliding aluminum or copper clad bottom pans on the cooktop can cause metal
markings on the cooktop surface. These marks should be removed

immediately

after the cooktop has cooled using the cooktop cleaning cream. Metal marks can

become permanent If not removed prior to future use.

Cookware (cast iron, metal, ceramic or glass) with rough bottoms can mark or
scratch the cooktop surface.

Do not slide anything metal or glass across the

cooktop.

Do not use your cooktop as a cutting board or work surface in the kitchen.

Do not cook foods directly on the cooktop surface without a pan. Do not drop heavy

or hard objects on the glass cooktop, because they may cause it to crack.

Cleaning Recommendations for the Ceramic Glass Cooktop

ik CAUTION

Before cleaning the cooktop, be sure the controls are turned to

OFF and the cooktop is COOL.

ik WARNING

I

DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can

chemically damage the ceramic glass surface.

For light

to

moderate soil:

Apply a few drops of CookTop® Cleaning Creme directly to the cooktop. Use a paper towel or use a

non-abrasive plastic

type

no-scratch cleaning pad to clean the entire cooktop surface. Make sure the cooktop is cleaned thoroughly, leaving no

residue.
For heavy, burned on soil:

Apply a few drops of CookTop® Cleaning Creme directly to the soiled area. Rub the soiled area using a

non-abrasive

plastic type

no-scratch cleaning pad, applying pressure as needed. Do not use the pad you use to clean the cooktop for

any other purpose.

If soils remain, carefully scrape soils with a metal razor blade scraper, holding scraper

at a 30 degree angle to the surface. Remove loosened soils with cooktop cleaning
cream and buff surface clean.

IMPORTANT NOTE: Damage to the ceramic glass cooktop may occur if you use an
abrasive type scratch pad. Only use cleaning products that have been specifically
designed for ceramic glass cooktop.

Plastic or foods

with

a high sugar content:

These types of soils need be removed immediately if spilled or melted onto the
ceramic cooktop surface. Permanent damage (such as pitting of the cooktop surface)
may occur if not removed

immediately. After turning the surface elements OFF, use

a razor blade scraper or a metal spatula with a mitt and scrape the soil from the hot
surface (as illustrated). Allow the cooktop to cool, and use the same method for heavy
or burned on soils.

38

Advertising