Kenmore ELECTRIC RANGE 790.4660 - Manual (Page 19)

Setting Oven Controls (con’t)
Setting Bake
The BAKE ( bai ^ pad controls normal baking. If preheating is necessary, refer to the PREHEAT (^ hi ^ t J) Feature for
instructions. The oven can be programmed to bake at any temperature from 170“ F to 550“ F (The sample shown below
isfor350“F).
INSTRUCTIONS PRESS
To set the Bake Temperature to 350°F
1. Arrange interior oven racks and place food in oven.
2. Press Q bai ^, will appearand "BAKE" will flash in the
display (Figure 1).
3. Press (T) (T) (o) (Figure 2). "BAKE " will continue to
flash and "350°" will appear in the display.
4. Press A beep will sound once the oven temperature
reaches 350° F and the display will show "350“" and " BAKE"
(Figure3).
Pressing will cancel the Bake feature at any time.
To change the Bake Temperature (example:
changing from 350°F to 425°F)
1. After the oven has already been set to bake at 350“F and the
oven temperature needs to be changed to 425“F, press ( bak ^
(Figure 4) and "— “ " will appear and "BAKE" will flash in the
display.
2. Press
(T) CD CD
5). "BAKE " will continue to
flash and "425°" will appear in the display.
"BAKE" and "425°" will stay in the display (See 3. Press
Figure 6).
Note: If the oven was recently heated from prior cooking and
has remaining heat, the bake element symbol may not show in
the display immediately.
DISPLAY
BAKt
Figure 1
CDO® lOn
I J U
350
8AK$
Q tai ^
Figure 2
1:30 350
BAKE
©
Figure 3
iilliiill
/'■“X
Figure 4
f B ake )
HPS
BAKE ...
®(DCD
Figure 5
lOn
• J U
H05'
BAKE
Figure 6
19