Check, Fig. 32 – Kenmore INTELLISOFT 625.38376 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Check
CHECK LIST OF STEP-BY-STEP GUIDES TO
INSTALL
Review the following list to ensure you have comple
the installation procedures.
_1. Check the incoming water. Has incoming water
been tested?
_2. Remove cardboard packaging from salt tank.
_3. Is the incoming water going to the valve inlet?
_4. Is the bypass valve placed into the service
position?
_5. Is the ground clamp installed?
_
6
.
Are the drain lines clamped and secured?
_7. Is the unit plugged into a continuously live outlet?
_
8
.
Has salt been added to the salt tank?
_9. Has the unit been sanitized? See page 19.
ing should be pulled out for service
position.
Bypass
Valve
Inlet
Valve
3-Valve
FIG. 32
21