Kenmore 119.1643301 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Install Side Shelf Upper and Lower Front Panels
□
Attach the Side Shelf Upper Front Panel to Side Shelf Frame using 3 Phillips Flead Bolts
(M4x8mm).
□
Attach the Side Shelf Lower Front Panel to Side Shelf Upper Front Panel using 3 Phillips Flead
Bolts (M4x8mm).
K
Phillips Flead Bolt M4x8mm
Qty: 6
Install Towel Bar Handle, "S" Hooks
□ Slide 3 "S" Flooks onto the Towel Bar Flandle. Use 2 Phillips Flead Bolts (M4x8mm) and 2 Washers
(M4) to attach the Towel Bar Flandle to the Side Shelf Frame. Note: When shelf is in upright
position, hooks should face out.
Phillips Flead Bolt M4x8mm
Qty: 2
Washer M4
Qty: 2
"S" Hook
Qty: 3
................
12