Kenmore 119.1643301 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Install Side Burner Valve
□
Detach side burner ignition wire from the reguiator hose. Feed side burner vaive and igniter
wire through hoie in ieft side of cabinet.
□
Open side burner iid and cut tie wrap securing grate to pan. On underside of pan, remove the 2
screws hoiding the side burner in piace. See Inset 1.
□
Secure the side burner vaive stem to the Side Burner Lower Controi Panei using 2 Phiiiips Head
Boits (M4x8mm). See Inset 2.
□
Center the side burner vaive into the side burner tube. See Inset 3. Reattach side burner to pan
with 2 previousiy removed screws.
□
Use 1 Phiiiips Head Boit (M4x8mm) to attach the Side Burner Lower Controi Panei to the firebox.
See Inset 4.
^
Inset 1
►* %
Inset 2
Phiiiips Head Boit M4x8mm
Qty: 3
j]
Inset 4
Inset 3
Attach Side Burner Control Knob and Side Burner Ignition Wire
□
Attach the side burner ignition wire over the side burner connector pin.
□
Push the Controi Knob onto the vaive stem.
-.....................
16